FiberWipe™ for removing wax, sealant, and ceramic coatings

FiberWipe™ 3-pack contains three pieces of our 350 gsm microfiber towel featuring Pearl Weave technology – enough for you to have one towel for product removal, one for buffing, and one as a backup, without ever reaching for a towel used for a different step. The short, densely woven fibers in a 70/30 (polyester/polyamide) blend ensure gentle contact with the surface and even product removal, without the towel just moving the product around or dragging it behind.

What FiberWipe™ offers

• 350 gsm weight – a lighter and more agile towel, ideal for precise, controlled work on both smaller areas and the entire paint finish.
• Pearl Weave technology – short, densely woven fibers that don't move product across the surface but trap it immediately.
• 70/30 (polyester/polyamide) blend – a combination of softness and sufficient structure for effective product removal without unnecessary resistance.
• Streak-free and drag-free – thanks to low surface friction, it doesn't leave the typical swirl marks on dark paint during wiping.
• Versatile use in the final treatment phase – from removing wax and sealants to ceramic coatings, as well as final polishing and quick detailer wipe-downs.

What FiberWipe™ is made of

The foundation is Pearl Weave technology – a densely woven structure with shorter fibers than regular microfiber towels. This construction makes FiberWipe™ a tool that works exactly where you guide it: it leaves no spots, doesn't move product residues from one place to another, and gives you full control over every stroke. The 350 gsm weight is chosen so the towel remains extremely soft, yet light and easy to handle – ideal for the final stages of detailing where every detail matters.

Where you can use FiberWipe™

Removing wax and sealant. This is exactly where FiberWipe™ shows its strengths – it evenly removes excess product without streaks and without traces that would need additional buffing.

Removing ceramic coatings. When applying a ceramic coating, it is crucial to remove the excess before it dries into spots. Thanks to its Pearl Weave structure, FiberWipe™ allows for controlled, even wiping even on larger areas.

Final polishing and buffing. After applying polish or a final detailer, FiberWipe™ manages to buff the surface to a high gloss without leaving fibers or streaks behind.

Quick detailer wipe-downs. Between washes, it serves as a quick towel to refresh the paint along with a quick detailer, without the risk of micro-scratches.

FiberWipe™ vs. FiberWipe Elite™. FiberWipe™ 350 gsm is the ideal choice for precise, controlled work – final polishing, removing thinner layers of wax, or situations where agility is key. If you are working with larger surfaces or thicker layers of product, reach for our FiberWipe Elite™ towel with a weight of 430 gsm, which handles more without sacrificing softness.

How to care for FiberWipe™ to ensure longevity

Wash on a synthetic program at max. 40 °C, preferably with a microfiber detergent, ideally separately or with other microfiber towels – never with cotton or terry cloth. Do not use fabric softener, as it clogs the delicate Pearl Weave structure, causing the towel to stop removing product evenly and start leaving streaks. We recommend washing towels used for waxes, sealants, and ceramic coatings separately from towels used for washing or interiors. Can be tumble-dried on low heat or air-dried.

NOX Equipment – we develop gear that truly performs in the garage

FiberWipe™ is one of the foundational products upon which we build the entire philosophy of the NOX Equipment brand: to design car care gear that is thought-out to the smallest detail and holds up even under daily, repetitive use. We don't just test materials in the lab, but directly in the field – on our own cars and in collaboration with detailing studios that use the towels for dozens of hours a week. We aren't concerned with the lowest price at any cost, but rather with ensuring that the user can be certain the product won't fail them when it matters most.

Frequently Asked Questions

What should I use to wipe off wax or sealant so that no streaks remain?
Thanks to Pearl Weave technology, FiberWipe™ removes excess product evenly without just moving it across the surface – which is why it doesn't leave typical circular wiping streaks.

For whom is the 3-pack ideal?
As a basic set for one vehicle pass – one towel for product removal, one for buffing, and one as a backup. For regular detailing or multiple vehicles, we recommend the 5-pack or 30-pack.

What should I use to wipe off excess ceramic coating?
FiberWipe™ is designed specifically for this phase – it removes excess ceramic coating before it dries into spots, even on larger paint surfaces.

What is the difference between FiberWipe™ and FiberWipe Elite™?
FiberWipe™ (350 gsm) is lighter and more agile, ideal for precise work and thinner layers of product. FiberWipe Elite™ (430 gsm) has higher absorbency and is suitable for thicker layers of wax or larger areas.

Is FiberWipe™ also suitable for final paint polishing?
Yes, after applying polish or a final detailer, FiberWipe™ buffs the surface to a high gloss without leaving fibers or streaks.

How should FiberWipe™ be washed properly to maintain its properties?
On a synthetic program up to max. 40 °C, without fabric softener and preferably with a microfiber detergent, ideally separately from towels used for washing or coarse dirt. Fabric softener clogs the fiber structure, causing the towel to stop removing product evenly.

Summary in bullet points

• Package contents: 3× FiberWipe™ towel
• Weight: 350 gsm
• Technology: Pearl Weave
• Material: microfiber, 70/30 blend (polyester/polyamide)
• Use: removing wax, sealant, ceramic coatings, final polishing, quick detailing
• Care: wash on synthetics at max. 40 °C, no fabric softener, preferably with microfiber detergent, separately from coarser towels
• Ideal for: a basic set for one vehicle pass