Microfiber towel for wiping off wax, sealant, and ceramic coatings without streaks or drag

FiberWipe™ is a 350 g/m² microfiber towel featuring Pearl Weave technology, which we designed specifically for that critical phase when a product's final look is decided – wiping off wax, sealant, or ceramic coatings. The short, densely woven fibers in a 70/30 (polyester/polyamide) blend ensure gentle contact with the surface and even removal of the product, without just pushing it around or dragging it along. FiberWipe™ glides over the paint with minimal resistance while still having enough structure to truly capture leftover protection residue.

What FiberWipe™ offers

• 350 g/m² weight – a lighter, more agile towel, ideal for precise, controlled work on smaller areas as well as the entire vehicle.
• Pearl Weave technology – short, densely woven fibers that don't push the product around the surface but capture it immediately.
• 70/30 (polyester/polyamide) blend – a combination of softness and sufficient structure for effective product removal without unnecessary drag.
• No streaks or drag – thanks to low surface friction, it doesn't leave behind typical circular wiping marks on dark paint.
• Versatile use in the final treatment stage – from wiping off wax and sealant to ceramic coatings, final polishing, and quick detailer wiping.

What FiberWipe™ is made of

The foundation is Pearl Weave technology – a densely woven structure with shorter fibers than standard microfiber towels. This construction makes FiberWipe™ a tool that works exactly where you guide it: it doesn't leave marks, it doesn't shift product residue from one place to another, and it gives you full control over every stroke. The 350 g/m² weight is chosen so the towel remains extremely soft, yet light and easy to handle – ideal for final detailing stages where every detail counts.

Where you can use FiberWipe™

Wiping off wax and sealant. This is exactly where FiberWipe™ shows its strengths – it wipes off excess product evenly without streaks or marks that would require further buffing.

Wiping off ceramic coatings. When applying ceramic coatings, it is crucial to remove excess before it dries into spots. Thanks to its Pearl Weave structure, FiberWipe™ allows for controlled, even wiping even on larger surfaces.

Final polishing and buffing. After applying a polish or final detailer, FiberWipe™ can buff the surface to a high gloss without leaving fibers or streaks behind.

Quick detailer wiping. Between washes, it serves as a quick towel for refreshing the paint along with a quick detailer without risking micro-scratches.

Delicate interior work. Thanks to the softness of the Pearl Weave structure, it is also suitable for sensitive interior areas, such as glass display surfaces or piano black trims.

FiberWipe™ vs. FiberWipe Elite™. The FiberWipe™ 350 g/m² is the ideal choice for precise, controlled work – final polishing, wiping off thinner layers of wax, or situations where agility is key. If you are working with larger surfaces, thicker layers of product, or want higher absorbency and more work surface, reach for our FiberWipe Elite™ towel with a 430 g/m² weight, which handles more without losing its softness.

How to care for FiberWipe™ so it lasts as long as possible

Wash on a synthetic cycle at a maximum of 40 °C, preferably with a microfiber detergent, ideally separately or with other microfiber towels – never with cotton or terry cloth. Do not use fabric softener, as it clogs the delicate Pearl Weave structure, causing the towel to stop wiping off product evenly and start leaving streaks. We recommend washing towels used for waxes, sealants, and ceramic coatings separately from towels used for washing or interiors to prevent coarser dirt from entering the fine structure. Can be tumble dried on a low heat setting or air-dried.

NOX Equipment – we develop gear that truly holds up in the garage

FiberWipe™ is one of the foundational products upon which we build the entire NOX Equipment philosophy: to design car care gear that is thought-out to the last detail and holds up even during daily, repeated use. We don't just test materials in the lab, but in the real world – on our own cars and in cooperation with detailing studios that use the towels for dozens of hours a week. It’s not about the lowest price at all costs, but about the user being sure that the product won't let them down when it matters most.

Frequently Asked Questions

What should I use to wipe off wax or sealant so there are no streaks?
Thanks to Pearl Weave technology, FiberWipe™ wipes off excess product evenly without just pushing it across the surface – which is why it doesn't leave the typical circular wiping streaks.

What should I use to wipe off excess ceramic coating?
FiberWipe™ is designed exactly for this phase – it wipes off excess ceramic coating before it dries into spots, even on larger paint surfaces.

What is the difference between FiberWipe™ and FiberWipe Elite™?
FiberWipe™ (350 g/m²) is lighter and more agile, ideal for precise work and thinner product layers. FiberWipe Elite™ (430 g/m²) has higher absorbency and is suitable for thicker wax layers or larger surfaces.

Is FiberWipe™ suitable for final paint polishing?
Yes, after applying a polish or final detailer, FiberWipe™ will buff the surface to a high gloss without leaving lint or streaks.

How many FiberWipe™ towels will I need?
For standard vehicle detailing, 2–3 pieces are sufficient (one for wiping the product off, one for buffing, and one as a spare). For regular detailing or multiple vehicles, a larger pack (5 or 30 pcs) is worth it.

How to properly wash FiberWipe™ to maintain its properties?
Use a synthetic cycle at max. 40 °C, without fabric softener, and preferably with a microfiber detergent, ideally separate from towels used for washing or those with coarser dirt. Fabric softener clogs the fiber structure, causing the towel to stop wiping the product off evenly.

Is FiberWipe™ suitable for professional detailing?
Yes, the Pearl Weave technology and 350 g/m² weight meet the demands of detailing studios where wax and ceramic coating removal is performed daily.

Summary in bullet points

• Weight: 350 g/m²
• Technology: Pearl Weave
• Material: microfiber, 70/30 blend (polyester/polyamide)
• Use: wiping off wax, sealant, ceramic coating, final polishing, quick detailing
• Stronger alternative: FiberWipe Elite™ 430 g/m² for thicker product layers and larger surfaces
• Care: wash on synthetic cycle at max. 40 °C, no fabric softener, preferably with microfiber detergent, separate from coarser towels
• Recommended number of pieces: 2–3 pcs for standard vehicle detailing